Now You Can Fix the Issue of Load Paper Message in HP

HP printers have become the most loving printer, there are users who rely upon HP printer to complete their day to day printing tasks for both office and home. HP is known to produce the most user-friendly printing products which have an array of impressive features. But during the course of use having few technical glitches is common and one of them is “issue of load paper” is HP is one of them. To fix the paper load issue try the below-given solution or make a call upon HP Toll Free Number:

HP Printer Customer Care Number

 Perform Printer Reset:

●       Turn in your printer by pressing the Power button

●       When you have the product turned on, remove the power cable from your printer

●       Also, disconnect all power cord from the wall outlet.

●       Wait for a few seconds before reconnecting the power cord to the wall outlet.

●       Place the power cord to the plug

●       Press the power button for a few minutes if the printer doesn’t turn on.

Print the Self-Test Report:

Once you are done restarting, try to print the documents namely self-test reports.

●       If you can easily print the self-test report, no other troubleshooting is required.

●       If you are not able to print it, go to the next step.

Check the Paper-Quality and Reload it:

Your printer may not be able to fetch the paper, due to dusty, torn, wet, wrinkled paper. Thus one must keep the best quality of the paper. Also, make sure that the quality of paper you use matches the requirements of your device. Follow the below-given steps to check the quality of your paper:

●       Remove papers from the tray.

●       Check for any obstruction inside in the tray and remove it further.

●       Thoroughly check the mechanism of your printer and the parts inside the tray,

●       Make sure you there is nothing which is hindering the performance of your printer

●       Also, clear the paper-jam if you think this one is the reason for the issue

●       If there is any ripped, torn, dusty, wrinkled, damp, dirty, and bent paper inside the tray, replace it immediately.

●       Also, make sure all papers in the tray are the same in size, thickness, quality, and type.

●       The printer must fetch one paper at a time.

●       In order to align the edges of paper, place paper on the flat surface.

●       The stack of paper must consist of a minimum of 10 sheets or a maximum 25 sheets.

Reload the Paper:

●       Slide the paper width guide outwards

●    Now, load the paper-stack containing large 216 X 279 mm (8.5X 11) in the paper tray, print-side down.

●       Keep sliding the stack of paper, until it stops.

●       Next, sliding the paper width guide against paper can help.

If you are not able to resolve errors using the above-given recovery methods, try contacting HP Printer Support and get instant help. Dial HP Toll Free Number and get instant support from the experts who are available all around the clock to help the troubled HP users.

View More :- http://brooklynne.net/profiles/blogs/how-to-connect-a-scanner-on-a-printer